RESOURCES
What the chip on a machine is for: the control loop, the joint, the sensors beside it, and identity.
Articles in Robot silicon
- Robot silicon
A control loop that closes on the machine
A control loop measures, corrects, and repeats on a fixed beat. A late correction is a wrong one, which is why the loop stays on the machine and why the first E31 design is a real-time controller.
· 4 min read
- Robot silicon
A controller at every joint
Motion and sensing happen at the joint. BramHA is being designed to put drive and measurement there too, so that less wiring runs along the machine and one part can be repeated.
· 4 min read
- Robot silicon
A machine that can prove what it is
Before a site lets a machine on its network, it wants to know what the machine is and what it is running. The first E31 design includes a hardware root of trust so that a machine can answer.
· 4 min read
- Robot silicon
The chip on the robot's side
A facility's inference pool can serve perception, decisions, and adaptation. Control, motion, stops, and safety stay on the machine. BramHA is being designed for the machine's side of that line.
· 4 min read
- Robot silicon
What BramHA is
BramHA is Element 31's silicon for robots: the chip on the machine's side of the link. It is in development. No chip exists and nothing is for sale.
· 4 min read