Skip to content

IN DEVELOPMENT · NO CHIP HAS BEEN TAPED OUT

RESOURCES

Guides, definitions, and direct answers on BramHA, a chip in development.

Topics

  • What the chip on a machine is for: the control loop, the joint, the sensors beside it, and identity.

    Browse
  • Why a robot's own silicon needs certainty instead of density, and what a mature process costs.

    Browse
  • How the chip is designed: AI Employees do the engineering, and a named engineer signs every gate.

    Browse
  • Where BramHA sits beside Czar Grid: the pool thinks for the floor, the machine acts for itself.

    Browse
  • What is not done yet, what has not been decided, and how to read a site about a chip in development.

    Browse
  • Short definitions of the terms used across E31 BramHA.

    Browse
  • Direct answers to the questions robot makers and engineers ask first.

    Browse

LATEST

Recently published.

  • Robot silicon

    A control loop that closes on the machine

    A control loop measures, corrects, and repeats on a fixed beat. A late correction is a wrong one, which is why the loop stays on the machine and why the first E31 design is a real-time controller.

    · 4 min read

  • Robot silicon

    A controller at every joint

    Motion and sensing happen at the joint. BramHA is being designed to put drive and measurement there too, so that less wiring runs along the machine and one part can be repeated.

    · 4 min read

  • Robot silicon

    A machine that can prove what it is

    Before a site lets a machine on its network, it wants to know what the machine is and what it is running. The first E31 design includes a hardware root of trust so that a machine can answer.

    · 4 min read

  • AI Employees

    A named engineer signs every gate

    AI Employees propose. A named engineer signs the specification, the design freeze, and the tape-out. Because a fabricated chip cannot be patched, that signature is where responsibility for the design sits.

    · 4 min read

  • AI Employees

    AI Employees design the chip

    The engineering on BramHA is being set up as the work of AI Employees, each with a role: architecture, logic design, verification, physical design, firmware, and program. They propose. They do not approve.

    · 4 min read

  • Questions

    Can I buy a BramHA chip?

    No. BramHA is in development. No chip exists, nothing can be ordered, and there is no partner intake.

    · 3 min read

  • Mature nodes

    Determinism over density

    An AI accelerator is asked for as much computing as possible. A control chip is asked for the same result, at the same moment, for years. The two requests lead to different silicon.

    · 4 min read

  • Questions

    Does BramHA replace the Czar Grid?

    No. Czar Grid serves the heavy AI work from inside the building. BramHA is being designed for the work that stays on the machine. They are on different sides of the same line.

    · 3 min read

  • Glossary

    Glossary: AI Employee

    An AI Employee is an AI agent that holds a defined role in a program's work. On BramHA, AI Employees are intended to do the engineering. They propose, and a named engineer signs every gate.

    · 2 min read

27 articles across 7 topics.